Ultimaker ABS - Pearl Gold - 2.85mm X 750g

/ 101 views /

Free Ground Shipping in the Continental US.

3D Printing filament produced by Ultimaker to provide optimal performance from your Ultimaker brand 3D printer.  

ABS is a material used for 3D Printing where exposure to temperatures above 100C are expected and where a high flex before break is required.  It is fairly soft and easily post processed with acetone vapor or sanding.  

Some studies have shown that ABS fumes may be harmful to your health.  Unless you require specific properties of ABS, we advise using any other filament.  Please use this filament only in a well ventilated area.  An enclosure with exhaust to the outside is ideal.  

Tips for printing with ABS:  ABS has a high tendency to warp, so the following should be considered:

Keep the print volume warm (above ~37C or 100F helps a lot) .  This can be done either with an enclosure around the printer or just keeping it in a hot location.  

Press the first layer into the build plate and run it slow.  

If all else fails, try using a raft.  


Price
Visit Store
Visit Store
Visit Store
Visit Store
Visit Store
$49.95
Visit Store