Monoprice 10548 - Premium 3D Printer Filament ABS 3MM 1kg/spool, Black



Monoprice 10548 – Premium 3D Printer Filament ABS 3MM 1kg/spool, BlackGet outstanding 3D printing results when you use 3.0mm ABS 3D Printer Filament from Monoprice! ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending.This 1 Kg spool features a thickness of 3.0mm 0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 200 C (392F) . Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS.Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb.Reel Dimensions: Reel Diameter: 195mm (7.68″) Hub Diameter: 95mm (3.74″) Spindle Diameter: 38mm (1.50″) Reel Width: 80mm (3.15″)