3D Printer Azteeg RepRap Controller Main Board 3D Printe Control Panel Compatible With Sprinter,Marlin,Repetie

/ 276 views /

fallback-no-image-34967

3D Printer Azteeg RepRap Controller Main Board 3D Printe Control Panel Compatible With Sprinter,Marlin,Repetie

Description:

The Azteeg 3D Printer is an open source controller designed to be used in RepRap 3D Printers and similar cartesian based machines including CNCs. It has all the features needed to run all current and future single extruder designs.
The Azteeg is based on Sanguino/Sanguinololu and is compatible with most Ardu based firmware(Sprinter,Marlin,Repetier, plus others.). It is pin to pin compatible with the Sanguinololu with the addition of a FAN PIN. The Azteeg features mostly SMT parts to ease production and reduce cost.
Compatible with Pololu and Stepstick stepper motor drivers with the ability to use an external power source for the motors with higher voltages. The Azteeg 3DP is your low cost, compact and expandable 3DP printer controller. Fully Assembled except for the white connectors where you have a choice between right angle and vertical orientation. Soldering iron required.

Features:
Atmel ATmega 644P with FT232RL FTDI USB chip
Compatible with Sprinter, Marlin, Repetier, others.
High current capacity connectors and PCB traces.
Mosfet control for 1 extruder and 1 hotbed
Extra PWM control for small fan or LEDs
3 end stops and 2 thermistor inputs
12-30v input high efficiency switching Power supply 500ma max
Dedicated uSD card female header [SDRAMPS compatible]
Low RDSon Mosfets for less heat buildup
Input power selector for micro controller [USB or internal regulator]
Secondary power input for stepper motors.
Optional pads for TVS spike suppression diodes for the Mosfets
Mosfet Heatsinks included

Pakacge Included:
1 x 3D Printer Azteeg RepRap Controller Main Board 3D Printe Control Panel Compatible With Sprinter,Marlin,Repetie

  • Atmel ATmega 644P with FT232RL FTDI USB chip
  • Compatible with Sprinter, Marlin, Repetier, others.
  • High current capacity connectors and PCB traces.
  • Mosfet control for 1 extruder and 1 hotbed
  • Extra PWM control for small fan or LEDs

Price
Visit Store
Visit Store
Visit Store
Visit Store
Visit Store
$51.99
Visit Store
MPN CNCP0064-HU
UPC 696761554588
Category